Два проекти, автопідбирач типу гантрі для збору бавовни та кардна машина Autocard SC 8, розроблені компанією Trützschler Spinning Machinery, успішно пройшли експертизу наукових та технологічних досягнень.

Jun 07, 2025

Залишити повідомлення

On June 5, 2025, entrusted by the China National Textile and Apparel Council (CNTAC), the China Textile Machinery Association organized a scientific and technological achievement appraisal meeting in Changzhou, Jiangsu Province, for two projects completed by Zorrin (Changzhou) Textile Machinery Co., Ltd. The projects were "Autopluck 6 Gantry Cotton Picker" (Project No.: 2024079) and "Autocard SC 8 Carding Machine" (Project No.: 2024078), both of which were CNTAC's science and technology guiding projects.

 

Експерти комітету оцінювання заслухали дослідницьку роботу та технічні звіти, звіти користувачів, звіти щодо новизни тощо двох одиниць завершення проекту, переглянули відповідні матеріали та оглянули виробничі майданчики обох проектів. Комітет оцінювання вважає, що два проекти повністю виконали вимоги технічного завдання. Загальна технологія двох продуктів, "Автопробийник 6" та "Автокард SC 8" прядильна машина, досягла міжнародного передового рівня. Серед них "Автокард SC 8" прядильна машина є на міжнародному ведучому рівні з точки зору ефективної прядильної площі. Комітет погоджується схвалити оцінку науково-технічних досягнень.

 

The Autopluck 6 gantry-type cotton picker developed for this project has the characteristics of a large cotton-picking working area, high picking yield, and convenient operation and maintenance. The main innovations are as follows: (1) The designed gripper arm width reaches 3500mm, and the diameter of the double grippers is 300mm. It can pick 8 horizontal row cotton bales, enhancing the fiber mixing effect and achieving a picking yield of up to 3000kg/h; (2) To achieve precise picking, the gripper arm lifting mechanism consists of four sets of screws, screw nuts, and lifting guide wheels. The four sets of screws are synchronized for transmission, ensuring stable operation of the gripper lifting, lowering, and cotton-picking movement; (3) The gripper arm adopts an out-cotton design in the middle, and the air duct adopts an Ω-shaped covering belt structure design. The covering belt moves synchronously with the trolley, and the negative pressure airflow of the fan efficiently absorbs and transfers the fibers, adapting to longer air ducts and higher production requirements.

 

The project developed the Autocard SC 8 carding machine, which features high production efficiency. The main innovations are as follows: (1) The diameter of the cylinder was increased to 1460mm, and the number of movable covers was increased to 112/42 pieces, with 12 pieces in front and 16 pieces at the back. This resulted in a main area of 4.8 square meters for the cylinder, thereby increasing the production capacity and the quality of the sliver; (2) Temperature detection protection devices were set in the mainarea of the cylinder, along with online detection and adjustment devices for the distance between the movable covers. The metal alarm of the movable covers was improved, enhancing the efficiency and ensuring the smooth operation of the entire machine; (3) An online detection and automatic adjustment device for the amount of debris in the first suction port of the hook roller was set. Through an optical sensor for detecting the amount of cotton fibers and the ratio of cotton to debris online, through intelligent calculation, the position of the dust removal knife was automatically adjusted online to ensure the stability of the shedding and debris removal.